DIL13F Underwater Connector Power Ethernet series-In-Line Connector 13 Pin Contact Fem

DIL13F Power Ethernet In-Line Connector — Overview

The DIL13F is a 13-contact SubConn Compatible Power Ethernet in-line subsea connector, female (sockets) face, combining four CAT 5E Ethernet twisted pairs with four 18 AWG power conductors and a screen in one wet-mateable interface. Power contacts are rated 600 V / 4 A (max 16 A per connector) and the data path sustains 1 Gbit/s up to 75 m.

13 Contacts 1 Gbit/s / 75 m 600 V / 4 A Power 600 bar Open Face 500+ Wet Matings SubConn Compatible IP68

Key Design Features

• Power + Ethernet in one connector: four CAT 5E twisted pairs, four 18 AWG power conductors and a screen eliminate a second penetration and cable.
• Wet-mateable: connect and disconnect underwater; the reconfigured contact geometry maximises data flow while eliminating cross-talk and noise.
• Gigabit performance: 1 Gbit/s sustained up to 75 m of matched PUR cable.
• SubConn Compatible: same face geometry and thread as the SubConn Ethernet series, so it retrofits existing panels without re-machining.
• Gold-plated contacts: female sockets in gold-plated brass UNS-C36000, male contacts in gold-plated beryllium copper for stable low-resistance data and power paths.
• Depth qualified: pressure tested to 600 bar / 8,700 psi open face; PEEK body option rated 300 bar / 4,350 psi.

Technical Specifications

Materials

Cable & Termination

Mating & Compatibility

Typical Applications

Underwater vehicles that carry cameras, sonar and lights on one link, subsea control modules needing both power and network, observatory nodes, offshore renewable and oil-and-gas systems, and ROV/AUV payload hubs.

Notes for Selection

The 13-contact layout mirrors the standard single-function connector outline, so it drops into existing cut-outs while unifying signal and power. Power circuits are limited to 16 A per connector in total.